#
Only one person should use each seat
belt at any one time.
Seat belt adjustment function
Vehicles with PRE-SAFE
®
: If the front seat belt
is not pulled tightly across your body, the seat
belt adjustment may automatically apply a cer‐
tain tightening force. Do not hold the seat belt
tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem (/ page 38).
Releasing seat belts
#
Press the release button in the seat belt
buckle and guide the seat belt back with the
seat belt tongue.
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
4
Vehicle
5
î Vehicle Settings
5
Belt Adjustment
#
Activate O or deactivate ª the function.
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
The ü seat belt warning lamp lights up for six
seconds every time the vehicle is started.
In addition, a warning tone may sound.
When the driver's and front passenger's doors
are closed and the driver and front passenger
have fastened their seat belts, the seat belt
warning goes out.
In the following cases, the seat belt warning
lights up during a journey if:
R
The vehicle speed exceeds 15 mph
(25 km/h) and the driver's or front
passenger seat belt is not fastened.
R
The driver or front passenger unfastens their
seat belt while the vehicle is in motion.
Airbags
Overview of airbags
1
Driver's knee airbag
2
Driver's airbag
38
Occupant safety
To Next Page
Loading...
Need help?
General
