Permissible trailer loads and drawbar
loads
Weight specifications
Maximumpermissible gross vehicle
weight rating
The gross trailer weight is calculated by
adding the weight of the trailer to the weight
of the load and equipment on the trailer.
You will find installing dimensions and loads
under "Technical data" (Y page 455).
Permissible noseweight
You will find installing dimensions and loads
under "Technical data" (Y page 455).
Loading atrailer
R
When loading the trailer, make sure that
neitherthe permissible gross weight of the
trailer nor the gross vehicle weight is
exceeded. The permissible gross vehicle
weight is indicated on the identification
plate on the B-pillar on the driver's side of
the vehicle.
You can find the maximum permissible
values on the type plates of your vehicle
and the trailer. When calculating how much
weight the vehicle and trailer may carry,
pay attention to the respective lowest
values.
R
The trailer drawbarload on the ball coupling
must be added to the rear axle load to avoid
exceeding the permissible gross axle
weight. The permissible gross vehicle
weight is indicated on the identification
plate on the B-pillar on the driver's side of
the vehicle.
i
Mercedes-Benz recommends atrailer
load where the trailer drawbar noseweight
accounts for 8% to 15% of the trailer's
permissible gross weight.
i
The weight of additional accessories,
passengers, and cargo reduces the
permissible trailer load and drawbar load
for yourvehicle.
Checking the vehicle and trailer weight
R
To checkthat the weights of the towing
vehicle and the trailer comply with the
maximum permissible values, have the
vehicle/trailer combination (including the
driver, passengers, and cargo with a fully
laden trailer) weighed on a calibrated
weighbridge.
R
Check the gross axle weight rating of the
front and rear axles, the gross weight of the
trailer and trailer drawbarload.
Removing the ball coupling
X
Remove the spring cotter.
X
Remove the bolt from the ball coupling
recess.
X
Remove the ball coupling from the ball
coupling recess.
X
Clean the ball coupling if it is dirty.
Information on cleaning and care of the trailer
tow hitch can be found at (Y page 374).
Storing the ball coupling
G
WARNING
Do not carry the ball coupling in the vehicle
interior if it is not secured.
Otherwise, you and others could be injured by
the ball coupling being thrown around if you:
R
brake sharply
R
change direction suddenly
R
are involved in an accident
Trailer power supply
!
You can connect accessories with a
maximum power consumption of 240 W to
the permanent powersupply.
You must notcharge a trailer battery using
the power supply.
The trailer socket of your vehicle is equipped
at the factory with apermanentpower supply.
Towing atrailer
259
Driving and parking
Z
To Next Page
Loading...
Need help?
General
