Settings menu
Introduction
In the Sett. menu, you have the following
options:
R
Changing the instrumentclustersettings
(Y page 274)
R
Changing the light settings (Y page 274)
R
Changing the vehicle settings
(Y page 276)
R
Changing the convenience settings
(Y page 277)
R
Restoring the factory settings
(Y page 278)
Instrument cluster submenu
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Instrument Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting: km or
miles.
X
Press the a button to save the setting.
The selected unit of measurementfor
distance applies to:
R
digital speedometer in the Trip menu
R
odometer and the trip odometer
R
trip computer
R
current consumption and the range
R
the navigation instructions in the Navi
menu
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the
steering wheel to select the Sett menu.
X
Press the : or 9 button to select the
Instrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display:
function.
You will see the selected setting Outside
Temperature or Additional
Speedometer [km/h] (USA)/
Additional Speedometer [mph]
(Canada).
X
Press the a button to save the setting.
i
The speed is shown in km/h(USA)/mph
(Canada).
Light submenu
Setting the daytime running lamps
i
This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press a to confirm.
274
Menus and submenus
On-board computer and displays