X
Press : or 9 to select the Daytime
Running Lights: function.
If the Daytime Running Lights:
have
been switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps (Y page 120).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam function.
If the Adaptive Highbeam function has
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (Y page 126).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-. function.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from Off
to Level
5 (bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X
Press the = or ; button on the
steering wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Ambient Light Color function.
X
Press a to confirm.
X
Press the : or 9 button to set the
color to SOLAR
, NEUTRAL or POLAR.
X
Press the a or % button to save the
setting.
Surround lighting and exterior lighting
delayed switch-off
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Surround Lighting
function.
When the Surround Lighting function is
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
X
Before leaving the vehicle, turn the
SmartKey to position 0 in the ignition lock.
X
Turn the SmartKey to position 2 in the
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the Surround
Lighting function and the light switch is set
to Ã, the following functions are activated
when it is dark:
Menus and submenus
275
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
