users are recognize, the high-beam head-
lamps are switched on.
If you are driving at speeds below approx-
imately 16 mph (25 km/h) or the roads are
adequately illuminated:
The high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the multifunction display
remains lit.
X
To switch off: move the combination
switch back to its normal position or move
the light switch to another position.
The _ indicator lamp in the multifunc-
tion display goes out.
Headlamps fogged up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of
the headlamp.
Interior lighting
Overview of interior lighting
Front overhead control panel
:
p To switch the left-hand front reading
lamp on/off
;
| To switch the automatic interior
lighting control on/off
=
c To switch the front interior lighting
on/off
?
u To switch the rear interior lighting
on/off
A
p To switch the right-hand front read-
ing lamp on/off
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
unless the SmartKey is in position 2 in the
ignition lock.
The color, brightness and display lighting ,for
the ambient lighting can be set using
COMAND (see the separate COMAND oper-
ating instructions).
The interior lighting control can be operated
using the front overhead control panel.
Automatic interior lighting control
:
p Switches the left-hand front reading
lamp on/off
;
| Switches the automatic interior
lighting control on/off
=
c Switches the front interior lighting
on/off
?
u Switches the rear interior lighting
on/off
A
p Switches the right-hand front read-
ing lamp on/off
Interior lighting
129
Lights and windshield wipers
Z
To Next Page
Loading...
Need help?
General
