Warning and indicator lamps in the instrument cluster
General notes
Some systems carry out a self-diagnosis when the ignition is switched on. Therefore, some
indicator and warning lamps may light up or flash temporarily. This behavior is non-critical.
These indicator and warning lamps only indicate a malfunction if they light up or flash after
starting the engine or whilst driving.
Safety
Seat belts
Warning/
indicator
lamp
N Signal type
Possible causes/consequences and M
Solutions
ü
N After starting the engine, the red seat belt warning lamp lights up for
6 seconds.
The seat belt warning lamp reminds the driver and front passenger to fasten
their seat belts.
X
Fasten your seat belt (Y page 48).
ü
N After starting the engine, the red seat belt warning lamp lights up. In addi-
tion, a warning tone sounds for up to 6 seconds.
The driver's seat belt is not fastened.
X
Fasten your seat belt (Y page 48).
The warning tone ceases.
Warning and indicator lamps in the instrument cluster
285
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
