Display messages
Introduction
General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may therefore differ from the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
With certain display messages, you will also hear a warning tone.
You can hide the display messages. The display messages are then stored in the message
memory. Rectify the cause of a display message as soon as possible.
When you stop and park the vehicle, please observe the notes on:
R
HOLD function (Y page 192)
R
Parking (Y page 170)
Hiding display messages
X
Press a or % on the steering wheel.
The multifunction display hides the display message.
The multifunction display shows high-priority display messages in red. Some high-priority dis-
play messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the mes-
sages have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory. You can call
up the display messages:
X
Press the ò button on the steering wheel to open the menu list.
X
Press : or 9 on the steering wheel to select the Service menu.
X
Confirm by pressing a on the steering wheel.
X
Press the : or 9 button to select the message memory.
If there are no display messages, the No Messages
display appears in the multifunction
display.
When there are display messages, the number of stored messages appears.
X
Press a to confirm.
X
Press the : or 9 button to scroll through the display messages.
Display messages
251
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
