Make sure that nobody is in the vicinity of the
closing area during the closing process.
Use one of the following options to stop the
closing process:
R
press the F button on the SmartKey.
R
pull or press the remote operating switch
on the driver's door.
R
press the closing or locking button on the
trunk lid.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid is open when the engine is running,
especially if the vehicle is in motion. There is a
risk of poisoning.
Always switch off the engine before opening
the trunk lid. Never drive with the trunk lid
open.
!
The trunk lid swings upwards when
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
i
The opening dimensions of the trunk lid
can be found in the "Vehicle data" section
(
Y page 406).
Opening
You can open the trunk lid automatically
using the SmartKey.
X
Press and hold the F button on the
SmartKey until the trunk lid opens.
Closing
You can close the trunk lid automatically
using the SmartKey or the closing button in
the trunk lid.
X
Press and release closing button : on the
trunk lid.
or
X
If the SmartKey is located in the immediate
vicinity of the vehicle: press the F but-
ton on the SmartKey.
You can release the button as soon as the
trunk lid starts to close.
X
To stop the closing process:
R
Press the F button on the SmartKey,
or
R
Press closing button : or locking but-
ton ; on the trunk lid, or
R
Press the remote operating switch on the
driver's door, or
R
In vehicles with HANDS-FREE ACCESS:
kick into the sensor detection range
under the bumper with your foot.
i
If the F button on the SmartKey is
pressed or HANDS-FREE ACCESS is initi-
ated after the closing process is stopped,
the trunk lid opens.
Trunk
93
Opening and closing
Z
To Next Page
Loading...
Need help?
General
