115
Controls in detail
Memory function
Storing positions into memory
왘 Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion (
컄 page 34).
왘 Press memory button M.
왘 Release memory button and press a
stored position button 1, 2, or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
왘 On memory switch, press and hold
stored position button 1, 2 or 3 until
the seat, steering wheel and rear view
mirrors have fully moved to the stored
positions.
Storing exterior rear view mirror
parking position
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position feature, see “Setting parking posi-
tion for exterior rear view mirror”
(
컄 page 149).
i
Releasing the button immediately
stops movement to the stored posi-
tions.
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each SmartKey or SmartKey
with KEYLESS-GO*.
To Next Page
Loading...
Need help?
General
