334
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for turn signal lamp
2 Low beam lamp cover (Xenon or
Bi-Xenon* lamp). Do not remove.
3 High beam lamp cover
Replacing front turn signal bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 253).
왘 Twist bulb socket 1 counterclockwise
and pull out.
왘 Push bulb into socket, turn counter-
clockwise and remove.
왘 Insert new bulb in socket, push and
twist clockwise.
왘 Reinsert bulb socket in lamp and twist
clockwise.
Replacing high beam bulbs
1 High beam bulbs
2 Locking mechanism
3 Parking and standing lamps
왘 Switch off the lights.
왘 Open the hood (컄 page 253).
왘 Press ends of headlamp cover tab to-
gether and remove cover.
왘 Pull electrical connector off.
왘 Turn locking mechanism 2 counter-
clockwise and take out the bulb.
왘 Insert the new bulb so that the base lo-
cates in the recess on the holder.
Warning! G
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high volt-
age in Xenon and Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.
To Next Page
Loading...
Need help?
General
