335
Practical hints
Replacing bulbs
왘 Turn locking mechanism 2 clockwise.
왘 Plug the connector onto the bulb.
왘 Align headlamp cover and click into
place.
Replacing parking and standing lamp
bulbs
왘 Switch off the lights.
왘 Open the hood (컄 page 253).
왘 Press ends of headlamp cover tab to-
gether and remove cover.
왘 Pull out the bulb socket with the bulb.
왘 Pull the bulb out of the bulb socket.
왘 Insert a new bulb in the socket.
왘 Reinstall the bulb socket.
왘 Align headlamp cover and click into
place.
Replacing side marker lamp
왘 Switch off the lights.
왘 Carefully slide lamp towards rear.
왘 Remove front end first.
왘 Twist bulb socket counterclockwise
and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket, push in, and twist
clockwise.
왘 To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Backup lamp
2 Turn signal lamp
3 Driver’s side: Rear fog lamp
Passenger’s side: Substitute lamp
왘 Switch off the lights.
왘 Open the trunk lid (컄 page 99).
왘 Fold trim to side and remove.
왘 Twist bulb socket counterclockwise
and pull out.
i
Have the headlamp adjustment
checked regularly.
컄컄
To Next Page
Loading...
Need help?
General
