EasyManuals Logo
Home>Mercury>Outboard Motor>90

Mercury 90 Manual

Mercury 90
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
17
90-10122R30
GB
gof59
11
of
OPERATION
ofe10
STARTING THE ENGINE (CONTINUED)
WARNING
RAPID ACCELERATION HAZARD - Tiller Handle Models - Before shifting
your outboard from neutral into gear, decrease engine speed to slow.
This will prevent a rapid acceleration that can cause people in the boat to
be thrown from their seats or out of the boat, causing injury or death.
11 Check for a steady stream of water flowing out of the water pump indicator
hole.
IMPORTANT: If no water is coming out of the water pump indicator hole,
stop engine and check cooling water intake holes for obstruction. No
obstruction may indicate a water pump failure or blockage in the cooling
system. These conditions will cause the engine to overheat. Have the
outboard checked by your dealer. Operating the engine while overheated
will cause engine damage.
gof60
F
2
1
R
N
7
6
N
R
F
3
ofj4
GEAR SHIFTING
IMPORTANT: Observe the following:
Never shift outboard into gear unless engine speed is at idle.
Do not shift outboard into Reverse when the engine is not running.
1 Your outboard has three gear shift positions to provide operation: Forward (F),
Neutral (out of gear), and Reverse (R).
2 Remote Control Models - When shifting, always stop at neutral position and
allow the engine speed to return to idle.
3 Tiller Handle Models - Reduce engine speed to idle before shifting.
4 Always shift outboard into gear with a quick motion.
5 After shifting outboard into gear, advance the remote control lever or rotate the
throttle grip (tiller handle) to increase speed.
ofm3
STOPPING THE ENGINE
6
Remote Control Models - Reduce engine speed and shift outboard to neutral
position. Turn ignition key to OFF position.
7 Tiller Handle Models - Reduce engine speed and shift outboard to neutral
position. Push in the engine stop button or turn ignition key to OFF position.
gof61
12
3
N
N
ofp8
EMERGENCY STARTING
If the starter system fails, use the spare starter rope (provided) and follow
procedure.
1 Remove flywheel cover.
2 Shift outboard to neutral (N) position.
WARNING
When using emergency starter rope to start engine, the start-in-gear pro-
tection provided by the remote control is inoperative. Make sure to set the
outboard gear shift into neutral to prevent outboard from starting in gear.
Sudden unexpected acceleration could result in serious injury or death.
3 Turn the ignition key to ON position.
gof62
4
5-6
ofp22
EMERGENCY STARTING
WARNING
To prevent getting an electrical shock, DO NOT touch any ignition com-
ponent, wiring, or spark plug wire when starting or running the engine.
WARNING
The exposed moving flywheel can cause serious injury. Keep your hands,
hair, clothing, tools, and other objects away from engine when starting
or running the engine.
Do not attempt to reinstall the flywheel cover or top cowl when engine is
running.
4 Place the starter rope knot into the flywheel notch and wind the rope clockwise
around the flywheel.
5 If engine is cold, hold the fuel primer button in and pump up the fuel pressure
with the fuel line primer bulb.
6 Pull the starter rope to start the engine.

Table of Contents

Other manuals for Mercury 90

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 90 and is the answer not in the manual?

Mercury 90 Specifications

General IconGeneral
BrandMercury
Model90
CategoryOutboard Motor
LanguageEnglish

Related product manuals