A decal on the transom bracket reminds the owner to check the fasteners
securing the outboard to the transom before each use.
Decal on the transom bracket
Steering Link Rod Fasteners (if equipped)
IMPORTANT: The steering link rod that connects the steering cable to the
engine must be fastened using a special washer head bolt ("a" ‑ Part Number
10‑856680) and self‑locking nylon insert locknuts ("c" and "d" ‑ Part Number
11‑826709113). These locknuts must never be replaced with common nuts
(nonlocking) as they will work loose and vibrate off, freeing the link rod to
disengage.
OUTBOARD INSTALLATION
eng 117
To Next Page
Loading...
Need help?
General
