Remote Control Features
Your boat may be equipped with one of the Mercury Precision or Quicksilver
remote controls shown. If not, consult your dealer for a description of the
functions and operations of the remote control.
a -
Trim/tilt switch – Refer to Power Trim and Tilt
b - Ignition key switch – OFF, ON, START
c -
Throttle only button – Refer to Operation – Starting the Engine
d - Safety lanyard switch
Warning System
WARNING HORN SIGNALS
When the key switch is turned to the "ON" position, the horn will turn on for a
moment as a test to indicate the horn is working.
There are two types of warning horns to alert the operator of an active problem
within the engine’s operating system.
1.
Continuous six second beep: Indicates a critical engine condition.
Depending on the condition, the Engine Guardian system may engage
and protect the engine by limiting its power. You should return to port
immediately and contact your servicing dealer.
2.
Intermittent short beeps for six seconds: Indicates a noncritical engine
condition. This condition does not require immediate attention. You may
continue using your boat, however, depending on the nature of the
problem, the engine’s power may be limited by the Engine Guardian
system (see Engine Guardian System following) to protect the engine.
You should contact your servicing dealer at your earliest convenience.
To Next Page
Loading...
Need help?
General
