Mercury Joystick Piloting for Outboards User Manual

Section 2 - On the Water
Page 28 90-8M0093150 eng MAY 2014
•
The autopilot will hold the compass heading that the boat was following when AUTO HEADING was pressed.
51882
5.
To adjust your course while in auto heading mode, refer to Course Adjustment Using the Turn Buttons or Joystick.
6.
To disengage auto heading mode, refer to Disengaging Auto Heading.
7.
Press AUTO HEADING a second time to place autopilot in standby mode and turn off all lights other than the standby light.
Course Adjustment Using the Turn Buttons or Joystick
While in auto heading mode, the turn buttons (course adjust buttons) change the set course heading each time they are
pressed. Holding the joystick left or right for one second will also adjust your course.
• Press the turn button in the direction of the desired heading change. Each press of the button changes the desired heading
by 10°.
a - Port turn (course adjust) button
b - Starboard turn (course adjust) button
c - Auto heading button and light
d - Resume button and light
• Deflect and hold the joystick in the desired direction for one second to make small adjustments in the chosen heading.
Each recognized movement adjusts the chosen heading by 1°.
b
a
c
d
51881

Mercury Joystick Piloting for Outboards Specifications

General

Brand	Mercury
Model	Joystick Piloting for Outboards
Category	Marine Equipment
Language	English