Mercury MercMonitor User Manual

GENERAL INFORMATION
8 eng
MercMonitor Gateway Protocol Acceptance
Description
Gateway is a software interface that allows or controls access to
other programs through a NMEA 2000 or J1939 protocol; a
backbone for communication to share information. The software
is capable of transmitting (TX) information to, and receiving (RX)
information from various parameter group number (PGN)
products.
Gateway Modes
Transmit (TX) Receive (RX)
Transmits engine data to NMEA 2000/J1939
compatible display devices.
Receives data from NMEA
2000/J1939 compatible
engines.
Base and RPM Smart Tow models require one
MercMonitor per engine.
Each engine requires its
own MercMonitor
regardless of the model
(base, RPM Smart Tow,
Smart Tow Pro, Gateway
Premier)
Gateway Premier and Smart Tow Pro models
require only one MercMonitor per vessel to
transmit multiengine data to multifunction
displays (MFD) through the NMEA 2000/J1939
protocol.
The MercMonitor will display one engine only
regardless of the model (base, RPM Smart
Tow, Smart Tow Pro, Gateway Premier).
Mercury Engine Data to NMEA 2000 Capable Products
Signal PGN Name NMEA 2000 PGN Mode
Rated RPM Engine Parameter Static 127498/0x1F20A RX/TX
Coolant Pressure
Engine Parameters Rapid
Dynamic
127489/0x1F201 RX/TX
Speed Over Water Speed 128259/0x1F503 RX/TX
RPM
Engine Parameters Rapid
Update
127488/0x1F200 RX/TX
Voltage
Engine Parameters Rapid
Dynamic
127489/0x1F201 RX/TX

Mercury MercMonitor Specifications

General

Brand	Mercury
Model	MercMonitor
Category	Marine Equipment
Language	English