GENERAL INFORMATION
18 eng
• Over Temperature
• Water in Fuel (WIF)
• Water Pressure
• Low Oil Pressure
• Low System Voltage
• Engine Communication Error
Identifying and Using the Screen Categories
The monitor displays engine and vessel information through
various screens. These screens can be selected to be favorites
which will flash on the screen for a specific amount of time. The
"Settings" menu option allows the screens to be turned off or on.
The "Settings" menu option also allows the calibration of the
monitor to the various different sensors like the fuel, trim, tabs,
and steering to name a few.
•
"Propulsion" contains all screens related to the propulsion
system; trim, engine performance, troll control, and Smart
Tow.
•
"Vessel" contains screens related to fuel use, tank levels,
tabs, GPS data, steering position, and other items such as
generators.
•
"Full Screens" displays various information from the
propulsion and vessel menu in large, easy to read letters.
The full screen menu also displays some information as "Tri
Data." There are five "Tri Data" screens.
•
"Favorites" are specific screens selected by the operator to
be reviewed quickly. The favorites will remain on the screen
for a specific amount of time. This time can be one second
up to 30 seconds or turned "OFF" to advance manually
through the screens. A total of nine screens can be selected
from the "Propulsion" menu, "Vessel" menu, or "Full
Screens" menu. Press and hold the "–" and "+" buttons
down at the same time for three to five seconds to add the
screen to the favorites menu.
To Next Page
Loading...
Need help?
General
