SETTINGS
64 eng
8. After the last character is saved, the name window is not
active and the program returns to the "Name" option.
9. Press the "–" to highlight the "Simulator" option and press
"MODE" to activate the simulation.
NOTE: The "Simulator" option is available when the monitor is
powered with a 12 volt source for display purpose only. This
screen cannot be activated when connected to a power
package.
10.Press the "–" to highlight the "Reset All" option.
IMPORTANT: Resetting to factory default will erase all
customized menu options. Refer to "Reset Gauge to the Factory
Default Settings."
11.Press the "–" to highlight the "Exit" option and press "MODE"
to return to the "Settings" menu.
MODE
System
33087
V2.04 Lvl 3
Reset All
[EDIT]
Name
Port
Software
Simulator No
[ UP ]
Exit
Reset Gauge to the Factory Default Settings
IMPORTANT: Performing a reset will return the gauge to the
factory defaults, eliminating any installation and calibrations
performed during the set up of the product.
1. While in the "Main Menu," press the "–" or "+" button to
highlight the "Settings" menu.
To Next Page
Loading...
Need help?
General
