GENERAL INFORMATION
12 eng
NOTE: Descriptive text alarm warning screens are displayed with
Gen I (2007) engines and newer.
a - Flashing "AL" alarm
b - Flashing warning icon
c - "+" button to show
descriptive text
When a problem is detected, the "AL" alarm appears and a
pop‑up window with the alarm location and fault number will be
displayed. The faulty component or warning is described in the
text. Press the "+" button for more information. This screen gives
a detailed description of the fault text. Press the "+" button to
view the required corrective action.
The alarm message will stay displayed until the "–" button is
pressed. This action will exit the warning screen. If there are
multiple alarms, press the "MODE" button to view the next
warning display.
If a problem can cause immediate engine damage, the Engine
Guardian System will respond to the problem by limiting engine
power. Immediately reduce the throttle speed to idle and refer to
the warning messages. If the "MODE" button is pressed to
display a different screen, the flashing alarm signal "AL" will
appear in the upper right corner to indicate there still is a
problem. Refer to the appropriate service manual for further
explanation of the problem and the correct action to take.
MODE
Alarms
AL
35736
!
[EXIT]
[SHOW]
a
b
c
!
System
To Next Page
Loading...
Need help?
General
