SETTINGS
eng 23
BUTTON COLOR
The "–," "+," and "MODE" button light color can be changed to
red, blue, green, white, yellow, purple, and ice blue. All of the
button colors can be selected to be displayed for approximately
15 seconds each. After the 15 seconds, the color will fade and
change into the next color. This is referred to as the color
"Wave."
1. Press the "–" button to highlight the "Button Color" option.
2. Press the "MODE" button to edit the button colors.
3. Press the "–" or "+" button to select a color, or select "Wave"
for the color of the buttons.
4. Press the "MODE" button to save the button color setting.
5. To exit the "Light/Contrast" menu, press the "–" or "+" button
to highlight the "Exit" option. Press the "MODE" button to
exit the "Light/Contrast" menu.
COLOR SYNC
The "Color Sync" feature selects the same color for the backlight
and the buttons. Turning the color synchronize on ("Yes"), turns
the "Button Color" control feature off.
1. Press the "–" button to highlight the "Color Sync" option.
2. Press the "MODE" button to turn the option on ("Yes"), or
turn the option off ("No").
3. To exit the "Light/Contrast" menu, press the "–" or "+" button
to highlight the "Exit" option. Press the "MODE" button to
exit the "Light/Contrast" menu.
REMOTE LIGHT
The "Remote Light" feature allows control of all the monitor
gauge lighting from any monitor gauge. This feature controls the
brightness, display color, button color, and night time mode. Two
or more monitor gauges must have this feature turned on for the
remote light feature to function.
1. Press the "–" button to highlight the "Remote Light" option.
2. Press the "MODE" button to turn the option on ("Yes"), or
turn the option off ("No").
To Next Page
Loading...
Need help?
General
