DRIVE SHAFT / PROPELLER SHAFT MODELS SERVICE MANUAL NUMBER 23
Page 8F-2 90-861326--1 MARCH 1999
Torque Specifications
Fastener Location Lb. Ft. N·m
Drive Shaft To Bearing Support Flange (MCM Models)
Drive Shaft To Output Shaft (MCM Models) 50 68
Propeller Shaft Coupling To Transmission Coupling (MIE Models)
Flywheel Housing To Block (MCM Models)
Output Shaft Housing To Flywheel Housing (MCM Models)
Engine Coupling 35 48
Bearing Support Housing Attaching Bolts 35-54 47-73
Coupling Set Screws (If Equipped) Securely
1
Safety wire set screws.
Tools
Description Part Number
Quicksilver Alignment Tool 91-805475A1
Quicksilver Slide Hammer Puller 91-34569A1
Lubricants/Sealants
Description Part Number
2-4-C Marine Lubricant With Teflon 92-825407A3
U-Joint and Gimbal Bearing Grease 92-828052A2
Quicksilver Engine Coupler Spline Grease 91-816391A4
Quicksilver Loctite 27131 92-809820
Loctite 290 Obtain Locally
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General