CHARGING SYSTEM
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 4C-3
Tools
Description Part Number
Bearing Removal and Installation Kit 91-31229A7
Universal Puller Plate 91-37241
Multi-Meter / DVA Tester 91-99750A1
Ammeter (0-100 Amp) Obtain Locally
Lubricants / Sealants / Adhesives
Description Part Number
Quicksilver Liquid Neoprene 92-25711--3
Torque Specifications
Fastener Location lb-in. lb-ft Nm
End Frame Screws 55 5.5
Brush Setscrews 18 1.5
Regulator Mounting Screws 42 4.2
Regulator Leads 25 2.5
Ground Terminal Nut 25 2.5
Pulley Nut 42 57
Alternator to Mounting Bracket 35 48
Alternator Mounting Bracket 30 41
Belt
Tension See Note
NOTE: Belt deflection is to be measured on the belt at the location that has the longest
distance between two (2) pulleys. Normally this location is between the power steering
pump and the belt adjustment pulley. This location will be different on engines with closed
cooling or models without power steering.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General