MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY SERVICE MANUAL NUMBER 23
Page 5C-48 90-861326--1 MARCH 1999
Throttle Position Sensor
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
1. Remove the cover from the starboard side of the engine.
75644
a
a-Starboard Engine Cover
2. Remove the flame arrestor from the throttle body.
3. Disconnect the harness connector from the TP sensor.
4. Remove the throttle body from the adapter.
5. Disconnect the harness connector from the TP sensor.
6. Remove the screws from the TP sensor.
7. Remove the TP sensor from the throttle body.
75657
a
b
c
a-Screw (2)
b-Throttle Position (TP) Sensor
c-Throttle Body
CLEANING AND INSPECTION
1. Clean the surfaces of the TP sensor with a dry cloth.
2. Inspect the sensor for signs of wear or damage.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General