MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY SERVICE MANUAL NUMBER 23
Page 5C-28 90-861326--1 MARCH 1999
Throttle Position (TP) Sensor
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
REMOVAL
1. Remove flame arrestor, throttle cable and throttle body as outlined in “Throttle Body”.
72800
a
b
c
d
a-Throttle Body
b-Throttle Position (TP) Sensor
c-Screws With Lockwashers
d-O-Ring
2. Remove TP sensor from throttle body.
CLEANING AND INSPECTION
1. Clean the surfaces of the TP sensor with a dry cloth.
2. Inspect the TP sensor for signs of wear or damage.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General