MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY SERVICE MANUAL NUMBER 23
Page 5C-46 90-861326--1 MARCH 1999
2. Place the retaining clip over the fuel injector.
75672
c
a
b
a-Fuel Rail
b-Retainer Clip
c-Fuel Injector
3. Connect the injector harness to the fuel injector.
4. Lubricate all of the o-rings on the fuel rail and carefully place them in the intake manifold.
5. Install the screws, stud, MAP sensor retainer clip and nut to retain the fuel rail.
75676
75675
75673
d
c
b
a
a-Fuel Rail Stud
b-Fuel Rail Screw
c-Nut
d-MAP Sensor Retainer Clip
6. Install the plenum and associated parts as previously described.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General