Mercury OptiMax 250 Service Manual

INSTALLATION
90-888438 JUNE 2002 Page 1D-27
4. Flush outer surfaces of water outlet nozzle.
Suggested Flushing Intervals
• After running jet in salt water environment
• Where boat was operated in shallow water or run aground.
• Overheat warning horn sounds (May be caused from accumulation of particles/debris
in jet powerhead)
CAUTION
If any of the above conditions are not corrected with normal flushing of engine, it
is recommended that the jet be taken to your authorized dealer for service.

Mercury OptiMax 250 Specifications

General

Brand	Mercury
Model	OptiMax 250
Category	Outboard Motor
Language	English