7
STANDARD DISPLAY SCREENS
NOTE:This manual shows all the Monitor display screens that are
available. Depending on your type of engine, not all these screens
will apply.
Hrs
Software Version Engine Hours
Start Up
At start up, a momentary (1
second) screen displays the
current monitor software
version, followed by a 4 second
display showing hours of engine
use.
Gal
Fuel Used
Displays approximate fuel used
since the last reset. Reset will
return display back to 0.
You can Reset anytime by
pressing and
buttons together momentarily.
RPM
Engine RPM
Tachometer – Displays engine
speed in Revolutions Per
Minute (RPM).
Gal/h
Fuel Flow
Displays current estimated
individual engine fuel
consumption in Gallons per
hour (Gal/hr) or Liters per hour
(Ltr/hr).
(continued on next pge)
To Next Page
Loading...
Need help?
General
