22
CAL 2 CALIBRATION
Fuel Tank Calibration
THERE ARE THREE METHODS TO SET UP THE FUEL TANK
LEVEL MONITORING FEATURE:
First: Do nothing. Linear readout based on raw sensor values. This
mode does not factor in irregular tank shapes.
Second: By following the tank calibration default procedure, which
is done without actually adding fuel to the tank. The Monitor will sup-
ply an estimated range value based on default sensor values. This
mode does not factor in irregular tank shapes.
Third: By following the tank calibration procedure completely, which
includes adding fuel at certain calibration points. Monitor will display
an estimated range value that factors in the tank shape.
To Next Page
Loading...
Need help?
General
