MONITOR 1.01-1.02
1-11
MONITOR – VERSION 1.01-1.02
CAL 1 Calibration
SAE English System
Metric System
English or Metric
Select whether you want the
readings in the SAE English
system or the Metric system.
1. Press the
button to toggle between units.
2. Press the
button to move to the next function.
Range Readings
Select whether you want the
readings in Miles, Nautical Miles
or Kilometers.
1. Press the
button to toggle between units.
2. Press the
button to move to the next function.
Fuel Tank Capacity
If the boat installation does not
have the fuel tank level sensor
wired to the monitor, then cali-
brate the fuel tank capacity set-
ting to read 0.
If a fuel tank level sensor is
wired to the monitor, than enter
the capacity of the fuel tank that
has the sensor.
IMPORTANT: Set the fuel tank capacity setting at 0 if the fuel
tank level is not going to be calibrated. This will prevent a
constant alarm.
3. Press the
button to input tank capacity number.
4. Press the
button to move to the next function.
To Next Page
Loading...
Need help?
General
