To Next Page

To Previous Page

SYSTEM TACH & SPEED

3-8

SYSTEM TACH & SPEEDOMETER

TROLL

–

TROLL

–

Speedometer

Tachometer

Actual Speed

Set Speed

Actual Speed

Set Speed

Troll Control

Basic Operation

NOTE:Troll control may not be available on all engine models.

With troll control you can maintain a trolling speed of 550 to1000 rpm

without using the throttle.

NOTE:Troll control min/max range may change depending on en-

gine type.

You can set the troll control by using either the tachometer or

speedometer. Tachometer will set the speed in RPM and speedom-

eter will set the speed in MPH, Kph or KN.

You can shut off troll control anytime by pushing the

MODE

button

when in the troll display screen or by moving the throttle.

If you have troll control set at a desired speed and then you shut off

the troll control, the system remembers the set speed and will return

to that speed when re-engaged.

The display screen will revert back to the previous screen after 10 sec-

onds of no activity. Push the

TROLL

–

button to reactivate the

display screen.

When the troll control is engaged and you are out of the troll control

screen, a flashing signal “TR” (a) will appear in the upper left corner

of the display to indicate troll control is still running.

Mercury SMARTCRAFT User Manual

Other manuals for Mercury SMARTCRAFT