SMART TACH & SPEED
4-4
SMART TACH & SPEEDOMETER
gog95
4
3
2
1
5
° F
Continued Next Page
Tachometer
osl4
Tachometer Displays
When the ignition is turned on, the tachometer will display the last
screen that was displayed before the ignition was turned off.
Press
MODE
to change display screens. You can revert back to the
previous screen by pressing and holding
MODE
for 2 seconds. This
will reverse the display rotation.
NOTE:Readings can be displayed in English (U.S.) or Metric. Refer
to Calibration.
1. Engine Break-in – Displays time remaining on the break-in peri-
od of a new engine. This screen will automatically disappear af-
ter the break-in period is complete.
2. Power Trim Angle - Water Pressure – Displays trim angle of
the outboard and cooling system water pressure.
3. Fuel Flow – Displays engine fuel use in gallons per hour or liters
per hours.
4. Temperature – Displays engine coolant temperature from Cold
to Hot.
5. Battery Voltage – Displays voltage level (condition) of battery.
To Next Page
Loading...
Need help?
General
