• Check the closed cooling fluid condition and level.
• Inspect the air filter element and clean it if necessary.
• Check the condition of the alternator and power steering pump ribbed V‑belt.
• Check the condition of the fuel injection pump belt. See your authorized dealer.
• Clean the seawater filter.
• Inspect the seawater pump and replace the impeller if necessary. See your authorized dealer.
• Inspect the sacrificial anode and replace if necessary.
Every 500 Hours or 5 Years (Whichever Occurs First)
• Replace the turbocharger outlet air temperature sensor.
• Inspect and clean the turbocharger intercooler core as required.
Every 1000 Hours or 5 Years (Whichever Occurs First)
• Clean the fuel tank.
• Inspect and clean, as required, the pipe bundles of the heat exchanger.
Every 2000 Hours or 5 Years (Whichever Occurs First)
Replace the fuel injection pump belt. See your authorized dealer.
Engine Oil
Checking the Engine Oil Level
NOTICE
With the engine running, the crankshaft journals or rod journals may strike and break the dipstick, resulting in damage to
internal engine components. Stop the engine completely before removing or inserting the dipstick.
1. Stop the engine and allow five minutes for the oil to drain into the pan.
2. Remove the dipstick, wipe it clean, and install it into the dipstick tube. Verify that the dipstick is completely inserted into the
tube.
3. Remove the dipstick and observe the oil level. The oil level must be between the marks on the dipstick. If necessary, add
oil.
a -
No oil required
b - Oil may be added but not to exceed range "a"
c - Oil must be added but not to exceed range "a"
Section 4 - Maintenance
90-8M0133568 eng JUNE 2017 Page 35
To Next Page
Loading...
Need help?
General