27
Instrument Panel Indicator
When the ignition switch is at the ON
position, most of the control indicators will
light up briefly as a function test.
Meaning of control indicator color:
Red = danger, important warning
Yellow= warning, information, fault
Green = confirmation on
Blue = confirmation on
Turn Direction / Hazard Warning
When the turning signal lamp flashes, the
direction indicator lamp on the corresponding
side also flashes. If the hazard warning lamps
are operated, both direction indicator lamps
will flash together.If either direction indicator
lamp in the instrument pack flashes very
rapidly, it indicates that the turning signal light
on the corresponding side has failed.
Door Open Warning
It indicated that the door is open or not
closed tightly.
12V Battery Charging Fault Indication
If this lamp illuminates after starting the
vehicle, it indicates that the low-voltage
battery charging system has failed.If this lamp
flashes, it indicates that the battery power is
low, and a prompt message appears in the
instrument pack. At this time, the system will
restrict or turn off some electrical devices.
Please start the vehicle immediately to charge
the battery.
Low Beam Indication
The headlamp low beam is turned on.
High Beam Indication
The headlamp high beam is turned on.
Position Lights
The side lamps are on.
Product Information
To Next Page
Loading...
Need help?
General
