36
Driving and Controls
Trial Run of New Vehicle
Following measures can be taken within the
initial mileage of 500 km, which can improve
the performance, promote the vehicle
economy and extend the service life:
• Avoid any emergency shutdown except
in an emergency. With this, the brake
can run in well.
• Try not to accelerate the vehicle sharply
or drive at a high speed to avoid motor
damage and save power.
• Do not tow any other vehicle with your
vehicle.
START/STOP Button*
The power switch is located below the
right side of the steering wheel and
has the following working positions:
LOCK, ACC and ON.
• LOCK
This position is for power turning off and
steering wheel locking. Only when you turn
the power switch to this position can you pull
out the key.
Lock the steering wheel. Remove the key and
turn the steering wheel till the steering wheel
is locked.
If you cannot turn the key when unlocking
the steering wheel, you can gently turn the
steering wheel to right/left for one thing and
turn the key for another.
• ACC
This position is for power-on of some
electrical equipment, such as the audio
system. The instrument panel illuminates
when the power switch is turned to this
position.
When the key is turned to ACC, check
whether the warning lamps and indicators on
the instrument panel are on and off normally.
Notes
Do not keep the key at “ACC” for a
long time. Otherwise, the power of 12V
battery may be excessively consumed.
Driving and Controls
To Next Page
Loading...
Need help?
General
