43
Parking Brake
Parking Brake
The parking brake impacts rear wheels.
The parking brake lever is between two front-
row seats. To operate the parking brake, stop
the vehicle, press the brake pedal and pull the
parking brake lever.
To release the parking brake:
1. Press the brake pedal.
2. Pull back on the parking brake lever
slightly .
3. Press the button on the parking brake
lever joint .
4. Release the parking brake lever when
holding the button .
Electronic Parking Brake (EPB) *
The parking brake impacts rear wheels.
As shown in the figure above, the electronic
parking brake (EPB) switch is between two
front-row seats.
Manually Activate The Parking Brake
To apply the parking brake, depress the
brake pedal to stop the vehicle, and pull up
the EPB switch. Release the EPB switch after
the EPB working indicator lights up and
P
the instrument panel displays “Parking Brake
Working”.
At this time, the EPB system clamps the
vehicle to park.
Manually Release the Parking Brake
If the parking brake must be released, first
make sure that the ignition switch is at the
ON position, depress the brake pedal, and
then press the EPB switch. The EPB working
indicator goes out, and the instrument panel
displays “Parking Brake Released” to remind
you that the parking brake has been released.
If the brake pedal is not depressed, the
instrument will command “please depress the
brake pedal and then release the EPB switch”.
When the EPB switch is operated, the switch
will respond only when it is released or
pressed for more than 0.1s.
Driving and Controls
To Next Page
Loading...
Need help?
General
