MG ZS EV User Manual

13
Information Centre
With the vehicle power system in the ON/
READY position, the information centre
function can be selected as follows:
• Press the UP/DOWN/LEFT/RIGHT
button in the RH steering wheel
multifunction switch pack, this will
access and display the information centre
options.
• Press the UP/DOWN button in the RH
steering wheel multifunction switch pack
to cycle through options.
• Press the OK button in the RH steering
wheel multifunction switch pack to
confirm or long press the OK button to
reset.
1 Vehicle Information
2 Health Centre
3 Settings
Vehicle Information
Vehicle Information includes:
• Energy Flow: Displays a graphic showing
the current state of power flow.
• Electrical Information: Displays the
current operation state of the vehicle,
including the voltage, current and motor
speed.
• Current Journey: Displays the trip
mileage, trip time, average speed and
average power consumption since vehicle
start. It can be reset by long pressing the
“OK” button in the RH steering wheel
multifunction switch pack.
• Accumulated Total: Displays the trip
mileage, trip time, average speed and
average power consumption since the
last vehicle reset. It can be reset by long
pressing the “OK” button in the RH
steering wheel multifunction switch pack.
Health Centre
• Tyre Pressure: displays the current status
of each wheel.
• Battery Voltage: displays the 12V Battery
Voltage.
• Warning Information: displays the
warning information or important notes
that are currently relevant to the vehicle.
Settings
Brightness level
Displays the current level and allows
adjustment of the backlight brightness.
Warning Message
Warning messages and prompts are displayed
in the information centre in the instrument
pack. Any communications are displayed in
Instruments and Controls
1

MG ZS EV Specifications

General

Brand	MG
Model	ZS EV
Category	Automobile
Language	English