23
Follow Me Home
After the START/STOP Switch is turned
off, pull the lighting stalk switch towards the
steering wheel. This will enable the Follow
Me Home function, dipped beam headlamps
and side lamps will illuminate depending upon
the vehicle configuration. It can be set on the
entertainment display.
Headlamp Levelling Manual
Adjustment
Position 0 is the initial position of the
headlamp levelling adjustment switch. The
headlamp levelling adjustment can be made
as per the following table according to the
vehicle load.
Location Load
0
Driver, or driver & front
passenger.
1
All the seats occupied with
no load.
2
All the seats occupied plus an
evenly distributed load in the
boot, or driver with full load.
3
Driver only, plus an evenly
distributed load in the boot.
Instruments and Controls
1
To Next Page
Loading...
Need help?
General
