MG ZS EV User Manual

22
Lights and Switches
Master Lighting Switch
1 AUTO Lamp
2 Side Lamps and Switch Illumination
3 Dipped Headlamps
4 Lights OFF
AUTO Lamp
When the vehicle power system is in the ACC
position, the auto lighting system defaults to
the ON position (1). The auto lighting system
will automatically switch the side lamps and
switch illumination on and off according to
the intensity of current ambient light.
With the vehicle power system switched to
the ON/READY position, the auto lighting
system defaults to the ON position (1).
The auto lighting system will automatically
switch the side lamps, switch illumination and
dipped headlamps on and off according to the
intensity of current ambient light.
Side Lamps and Switch Illumination
When the START/STOP Switch is in the
ACC position, turn the master lighting switch
to position 2 to operate the side lamps and
switch illumination.
When the START/STOP Switch is in the ON/
READY position, turn the master lighting
switch to position 2 to operate the daytime
running lamps, rear side lamps and switch
illumination.
With the START/STOP Switch in the OFF
position if the lighting switch is in position
2 and the driver’s door is opened an audible
warning will sound to alert the driver, the
side lamps will remain on.
Dipped Headlamps
When the START/STOP Switch is in the ON/
READY position, turn the master lighting
switch to position 3 to operate the dipped
headlamps, side lamps and switch illumination.
Lights Off
Turn the master lighting switch to position
4, this will switch off all lamps, releasing the
switch will allow it to return to the AUTO
switch position.
Daytime Running Lamp
The daytime running lamps turn on
automatically when the START/STOP
Switch is in the ON/READY position.
When the dipped headlamps are switched
on, the daytime running lamps extinguish
automatically.
Instruments and Controls

MG ZS EV Specifications

General

Brand	MG
Model	ZS EV
Category	Automobile
Language	English