All accessories in the refrigerator should be removed
before dismantling the water tank of water dispenser.
1) Remove 2 screws indicated by the red circle in the
right diagram;
2) Disassemble 2 water pipe connector indicated by the
arrow.
One-way water valve:
1) Press the water valve junction with thumb, put strength
to pull the water pipe from the water valve;
2) The disassembly of the other end of the water valve is
the same as 1)
3) Press the water valve junction with thumb, put strength
to insert the water pipe into the water valve before
loosening the pressing place, to complete the water
valve installation.
The disassembly method for two-way water valve is the
same as that of the one-way water valve.
Note: be sure to insert the water pipe in position during
installation, or water leakage may occur.
To Next Page
Loading...
Need help?
General
