Service Manual_2020-V1.0
33
Refrigerator lamp switch is located at the left top inside
the refrigerator upper hinge cover.
1) Remove the fixed screw on the hinge cover indicated
by the arrow in the diagram, and open the hinge cover;
2) Take out the lamp switch from the card slot, to
complete the disassembly of the lamp switch.
1）
2）
The freezing lamp switch is located on the left tank of the
freezing chamber;
1) Lever the light switch with a screwdriver;
2) Unplug the terminal and complete the replacement.
The light switch of variable temperature chamber is
located on the left tank of the variable temperature
chamber, and the disassembly method is the same as
that of the freezer light switch of the freezer room.
7.4 Air duct components refrigerating chamber and fan motor
Air duct components of refrigerating chamber
All accessories in the refrigerating chamber should be
removed before dismantling the air duct components.
1）Remove 4 screws indicated by the red circle in the
diagram, open the air duct cover plate from downward
with hand and take it down;
To Next Page
Loading...
Need help?
General
