Service Manual_2020-V1.0
41
7.9 Evaporator and Defrost system
Evaporator in freezing chamber
1）Remove the air duct components in freezing chamber.
2）Disconnect all connecting terminals.
3）Remove the welding on inlet and outlet tubes.
4）Remove the evaporator to change a new one.
Defrost heater component on the evaporator
This product's defrosting sensor, fuse and defrosting
heater are integrated components, if only they do not
work, they can be replaced separately.
1）Disconnect the connecting terminals.
2）Cut off the band.
3） Use nipper plier to unlock all metal hooks of heater
pipe, separate the heater from the evaporator.
4）Change a new defrost heater component.
To Next Page
Loading...
Need help?
General
