MCAC-UTSM-201606 Midea 50Hz AC Fan Coil Unit Two-pipe Wall-mounted Series
- 36 -
13.6 Wiring
Cautions:
• The reserved function is indicated in broken line table, users can select it when necessary.
• An all-pole disconnection device which has at least 3mm separation distance in all pole and a residual current
device (RCD) with the rating of above 10mA shall be incorporated in the fixed wiring according to the national
rule.
• The appliance shall be installed in accordance with national wiring regulations.
Take out the faceplate, and then dismantle the display cover.
Individual connect the power cord and signal line, adjust the dial switch.
13.6.1 Terminal Board Diagram
The wiring diagram please refers to chapter 9.
Note:
The air-conditioners can connect with Central Control Monitor (CCM). Before operation, please wiring correctly and
set system address and network address of indoor units.
Single phase indoor unit:
To Next Page
Loading...
Need help?
General
