Programming the amount: Espresso, Coffee and Hot water
(see "Programming the amount (Setting the portion sizes)")
Automatic rinsing: On, Off
Steam system: On, Off
Lighting: Brightness (darker or lighter)
Info: No. of drinks, Portions until descaling
Safety: System lock
Water hardness: Soft, Medium, Hard, Very hard
Display: Contrast, Brightness
Volume: Buzzer tones, Keypad tone
Maintenance: Carry out (see "Cleaning and care")
Showroom prog.: Demo programme, Off
Factory default: All settings (all settings reset to the factory
default), Reset user profiles
Selecting a language
If you want to change the language used in the display, use
the Settings menu and follow the flag symbol.
^ Touch the right arrow sensor until "Settings" is highlighted
and touch the OK sensor.
"Language" will already be highlighted in the display.
^
Touch the OK sensor.
^
Touch one of the arrow sensors until the language you want
appears.
A tick will appear beside the language currently selected.
^
Touch the OK sensor to select the language you want.
Settings: Customising your machine
29
To Next Page
Loading...
Need help?
General
