It can also be combined with other Miele built-in appliances.
If the coffee machine is to be built in above another
appliance, there must be a full-width, closed shelf between
the appliances (except when it is combined with a Miele
system drawer).
The machine can also be installed in a mobile unit which is
available to purchase.
Installation
Before installation make sure that there is no power supply
to the machine. This also applies should it ever need to be
taken out of its housing unit.
The machine must be built in before it is operated.
You will need two Allen keys (size 3 and 5) for installing
the machine.
^ Push the machine all the way into the niche until there is a
resistance. Then check the height to make sure it is sitting
centrally in the unit and that it is level.
If this is not the case you can adjust the height of the 4 feet
underneath the machine using the larger Allen key.
The feet can be unscrewed by up to approx. 10 mm.
Installation
81
To Next Page
Need help?
General
