Technical Information
54
CVA610 Coffee System
1 Fixing screw
2 Drip tray
3 Underlay
4 Outlet
5 Cable holder
6 Connection hose
7 Outlet
8 Retainers
9 Moveable dispensing nozzle
10 Cover
5.16 Coffee Dispensing Nozzle - Removal
Refer to Figure 5-16.
1. Open the door.
2. Remove the grille and drip tray from the door.
3. Remove the fixing screws from the white panel under and
behind the nozzle.
4. Remove the white panel.
Note
The two fixing screws for the moveable coffee-dispensing nozzle
are on the rear of the dispenser unit.
5. Remove the 2 screws from the coffee-dispensing nozzle
by hand.
6. Pull out the hose (Item 6), from the outlet, (Item 7).
7. Pull out the moveable coffee dispensing nozzle (Item 9),
to its end stop.
8. Unclip the outlet and remove it.
9. Remove the moveable coffee dispensing nozzle.
Figure 5-16: Components of the Coffee Dispensing Nozzle.
To Next Page
Loading...
Need help?
General
