Technical Information
79
VA
1
offee
stem
1 Grinding cone fixing screw
2 Intake worm gear
3 Washer
4 Adjustment ring
5 Grinding ring
6 Grinding cone
7 Mounting
8 Balls
9 Springs
10 Carriers
11 Felt ring
12 Grinder motor
Note
When the grinding cone (Figure 5-43, Item 6), is removed the balls,
(Figure 5-43, Item 8), may stick to it and then fall off.
Refer to figure 5-43.
16. Remove the grinding cone (Item 6).
17. Remove the balls (Item 8).
18. Remove the mounting (Item 7).
19. Remove the springs (Item 9).
20. Remove the carriers (Item10).
21. Remove the felt ring (Item 11).
Fi
ure 5-43: Grinder