Modes of operation
15
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication
facility which enables the automatic op‐
eration of the cooker hood depending
on the operational state of the hob.
To make use of the communication fa‐
cility, the hob must be fitted with a
Con@ctivity 2.0 Stick .
Please refer to the installation instruc‐
tions for the Con@ctivity 2.0 stick to
check whether it is compatible with
your hob.
To use the Con@ctivity 2.0 function, a
wireless connection must be establish‐
ed between the hob and the cooker
hood (see "Activating Con@ctivity 2.0).
The hob transmits information about its
operational status via a wireless signal
to the cooker hood.
– The hob lighting will switch on auto‐
matically.
– With the deflector plate pulled out,
during cooking, the cooker hood au‐
tomatically sets the power level ac‐
cording to the number of cooking
zones in operation and their power
levels.
– After the hob has been switched off,
the cooker hood fan and the hob
lighting will switch off automatically.
See "Operation" for detailed informa‐
tion about this function.
To Next Page
Loading...
Need help?
General
