Description of the functions
15
Con@ctivity 2.0 function
Automatic control
The rangehood has a communication
faci
lity which enables the automatic
operation of the rangehood depending
on the operational state of a Miele
electric cooktop.
To enable the communication function,
the cooktop must be equipped with the
corresponding Con@ctivity 2.0 dongle
.
Please refer to the installation
instructions for the Con@ctivity 2.0
dongl
e to determine whether
connection to your cooktop is possible.
In order to use the Con@ctivity 2.0
functio
n, radio contact between the
cooktop and the rangehood must be
activated (see "Activating Con@ctivity
2.0").
The cooktop transmits information
about its oper
ational status via a radio
signal to the rangehood.
– When the cooktop is switched on,
the co
oktop lighting comes on
independently and the fan also
switches on and the deflector plate
comes out.
– During cooking the rangehood
automatically sets the power level
according to the number of cooking
zones in operation and their power
levels.
– After the cooktop has been switched
off, the r
angehood fan and the
cooktop lighting will switch off and
the deflector plate will retract.
See "Operation" for detailed
information about this function.
To Next Page
Loading...
Need help?
General
