Installation
37
Installation recommendations
– To achieve optimum vapour
e
xtraction, the rangehood must cover
the cooktop. It should be positioned
centrally over the cooktop, not to the
side.
– The cooktop should be no wider than
the r
angehood and, if possible, it
should be narrower, especially for
safety distances greater than 750
mm.
– The installation area must be easily
acce
ssible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.
Before installation
Befor
e installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
To Next Page
Loading...
Need help?
General
