Operation (automatic mode)
19
Cooking process
If,
for example, you switch on a
cooking zone at the highest power
setting to heat a pan for frying and
reduce the power level after approx.
60 to 90 seconds*, a cooking process
is recognised (*60 seconds to 5
minutes for a HiLight cooktop).
The rangehood switches itself on and
when the coo
ktop power level has been
reduced, the rangehood switches to
power setting 3 and remains at that
level for approx. 5 minutes.
After that the rangehood power setting
is det
ermined automatically by the
Con@ctivity function.
Y
ou can select another power setting
manually before then.
Switching off
Switch off all cooking zones.
The rangehood fan will reduce its
power level over the
next few minutes
and will eventually switch itself off.
This helps to neutralise any lingering
vapours and odours in the
air.
– From the intensive setting IS the fan
switches imm
ediately to setting 3.
– If the fan is operating at level 3, it will
switch to level 2 after approx. 1
minute.
– From level 2, the fan switches to level
1 aft
er 2 minutes.
– After 2 minutes at level 1 the fan
switches itse
lf off. The deflector plate
retracts.
– After another 30 seconds, the lighting
switches off.
The cooking process is then finished.
To Next Page
Loading...
Need help?
General
